pastefile1
@@ -0,0 +1,34 @@
+G91 ; use relative positioning
+G0 Z5; move Z up 5mm prior to homing
+
+M117 Heating bed and hot end... ; Message
+M140 S[first_layer_bed_temperature] ; set bed temp
+M104 S80 ; set hot end to a relatively low temp to save time after levelling
+M190 S[first_layer_bed_temperature] ; wait for bed temp
+
+M117 Waiting for bed expansion ; Message
+G4 S60 ; wait 1 minute for the bed to expand
+
+G90 ; use absolute positioning
+M83 ; extruder relative mode
+
+M117 Homing... ; Message
+G28 ; home all
+M117 Levelling... ; Message
+G29 ; auto bed level
+
+
+G92 E0 ; reset extruder
+M117 Heating hot end ; Message
+M104 S[first_layer_temperature] ; set extruder temp
+M109 S[first_layer_temperature] ; wait for extruder temp
+
+M117 Starting print ; Message
+G1 Z2 F240
+G1 X2 Y10 F3000
+G1 Z0.28 F240
+G92 E0.0
+G1 Y190 E15.0 F1500.0 ; intro line
+G1 X2.3 F5000
+G1 Y10 E30 F1200.0 ; intro line
+G92 E0.0
\ No newline at end of file